Field guide 01 / Assessment
Read Damage Before Acting
Start with the building, not the instrument. A useful timber assessment connects visible condition, environmental causes and structural function before recommending a treatment.
Begin with a question that changes a decision
Before opening a case of instruments, describe what must be decided. Is a bearing end losing effective section? Is water still entering a roof junction? Does an old joint remain engaged under its present loading? Each question calls for different evidence. A broad instruction to “scan the beam” risks producing attractive files without resolving the concern that brought the team to site.
Walk the building with someone who understands its use and history. Look above and below the suspect timber, follow rainwater routes, and record alterations that might have moved loads. Roof coverings, blocked ventilation and later service penetrations can explain more than an isolated close-up of a damaged surface. Establish safe access before touching an unstable element; inspection must not become an accidental loading test.
Create a location system that another person can follow. Give each element and connection a consistent identifier, mark orientation, and photograph the wider setting before the detail. Preserve original marks and finishes. Where historic fabric or protected species may be affected, permissions and specialist advice belong before invasive investigation, not after it.
Separate moisture evidence from moisture assumptions
Moisture is a condition to investigate, not a single universal pass-or-fail reading. An electrical meter responds to its measurement principle and settings. Species, temperature, salts, surface treatments, electrode contact and depth can influence interpretation. Record the instrument, method, correction assumptions and exact test locations. Compare readings across a sensible pattern rather than selecting the one number that confirms a preferred explanation.
EN 13183 describes methods for determining moisture content in sawn timber. Its oven-dry reference method and electrical methods are useful technical starting points, but applying them to a decorated historic beam requires judgement about sampling and damage. A dry surface does not establish that an enclosed end is dry, and one visit does not describe a seasonal moisture cycle.
Look for causes and trajectories. Note rainfall exposure, heating patterns, condensation risks and contact with damp masonry. Fungal decay needs suitable conditions, but visible evidence may outlast the conditions that produced it. Likewise, exit holes alone do not establish current insect activity. Where identification changes treatment, ask a suitably qualified specialist rather than inferring an active infestation from appearance.
Choose complementary tests, not competing gadgets
Surface laser scanning and photogrammetry can describe geometry, distortion and access constraints. They do not reveal the soundness of concealed wood. Resistance drilling samples resistance along a narrow path and leaves a small hole; its trace is not a direct strength certificate. Stress-wave methods depend on wave travel, geometry, moisture and interpretation. None removes the need to understand the timber and its connections.
Use a staged investigation. Begin with documentary research and visual examination, then add targeted methods where the result could change the intervention. Confirm calibration and operator competence, and retain raw information alongside processed plots. If different methods disagree, investigate the reason instead of averaging unlike measurements into a falsely reassuring score.
EN 17121 provides guidance for the on-site assessment of load-bearing historic timber structures. It is a framework for a competent assessment, not a device-specific recipe. The ICOMOS Principles for the Conservation of Wooden Built Heritage similarly place understanding and documentation ahead of intervention. Local statutory duties and conservation approvals still apply.
Turn observations into an explicit assessment
A useful report distinguishes observation, interpretation and recommendation. “Soft material at the accessible bearing edge” is an observation. “Decay extends through the support” is an interpretation that needs evidence. “Install a designed local repair” is a recommendation that depends on structural checks, access, significance and the moisture strategy.
End with a map of known conditions and unresolved areas, the assumptions affecting structural judgement, and a proportionate next step. Sometimes that step is monitoring after a leak is corrected. Sometimes it is temporary support and further opening-up under supervision. The aim is not to maximise the quantity of testing; it is to make retention decisions defensible while sacrificing as little original material as possible.
| Method | Useful contribution | Important limitation |
|---|---|---|
| Visual survey | Connections, defects, history and moisture routes | Concealed zones remain uncertain |
| Surface scanning | Geometry and repeatable spatial records | Does not establish internal soundness |
| Resistance drilling | Local changes along a test path | Limited sampling; requires interpretation |
| Moisture testing | Evidence of current conditions and trends | Method, depth and environment affect results |