Field guide 02 / Controlled shaping
Precision Without Excess
A machine can repeat a cut accurately. Conservation asks a prior question: whether that cut belongs in the original timber at all.
Define the retained boundary first
Controlled machining becomes useful when the retained material, repair geometry and structural purpose have already been established. It should not be used to discover a convenient rectangular shape by progressively removing inconvenient historic wood. Agree the boundary between sound retained fabric and the intended repair, including any areas whose condition remains uncertain.
That boundary is rarely only a technical line. Early tool marks, assembly numbers, finishes and evidence of former joints may influence it. A conservation architect or other appropriate specialist should help resolve significance, while the structural designer checks whether the proposed connection and remaining section can perform their intended role. The operator needs a clear stop instruction when actual conditions depart from the model.
Often the most effective use of industrial equipment is to shape a new insert away from the building. A stable workshop setup can reduce on-site cutting and make trial work easier to inspect. This does not make workshop production automatically preferable: transport, access and the risk of losing a reliable site reference may favour a different sequence.
Carry uncertainty into the digital model
Laser scans and photogrammetry can record irregular geometry and support the design of local inserts. They still need a documented coordinate reference, scale checks, sufficient coverage and identifiable control points. Occluded faces are not measured faces. A smooth reconstructed surface may be partly an algorithmic assumption rather than a direct record of the wood.
Separate the surveyed surface from the proposed repair in the model. Keep an untouched survey file, record processing choices and use versioned drawings for approved geometry. If the building has moved since the survey, confirm critical dimensions at the point of work. A computer-controlled cutter can reproduce a stale model very consistently.
Use tolerances that relate to the joint, material and assembly method rather than quoting machine capability as project accuracy. Moisture movement, grain direction, surface preparation and access for fitting may matter more than the nominal resolution of the tool path. An exceptionally tight dry fit is not automatically a suitable bonded joint, nor does a visible gap automatically indicate poor work when an intentionally designed allowance is required.
Trial the sequence before touching significant fabric
A representative mock-up tests more than appearance. It can reveal cutter access problems, fragile short grain, unsuitable clamping, breakout and an assembly sequence that looked possible only on screen. Use material and grain orientation that meaningfully represent the intended repair. Record what the trial did not reproduce, including historic defects or confined site conditions.
Check the workholding strategy and the order in which material will be removed. As sections become thinner, the same clamping force or cutter direction may no longer be appropriate. Protect nearby finishes and establish a debris collection method. Extraction and respiratory protection should follow the site’s risk assessment and applicable occupational safety requirements; dust from old coatings may introduce hazards beyond ordinary wood dust.
Non-contact or highly specialised methods should face the same evidence test. Laser cleaning, for example, may be useful in selected conservation contexts but can alter a wooden surface or finish if poorly matched. It is not a default structural cutting method. Require material-specific trials and conservation approval rather than adopting a technique because it appears more advanced.
Keep craft judgement inside the process
Digital manufacture and hand fitting are not opposing camps. A workshop may machine most of a new insert, then allow careful hand adjustment at a protected interface. Conversely, a simple physical template may be more dependable than a complex survey for a small, accessible repair. Choose the least elaborate process that provides adequate control and documentation.
EN 1995-1-1, commonly known as Eurocode 5, provides a structural timber design framework within its scope; it does not by itself validate a historic repair detail. EN 14081-1 addresses strength-graded structural timber within its scope and should not be read as an automatic grade for every reclaimed or historic member. The relevant designer must establish how material properties and connection behaviour are justified for the actual project.
Before installation, record insert identification, species information where established, moisture condition, grain orientation and the final fit. Keep photographs of surfaces that will become concealed. Precision is most useful when it leaves a traceable repair, not merely an impressive machine file.
| Approach | Potential benefit | Question before use |
|---|---|---|
| Physical template and hand fitting | Direct response to local irregularity | Can accuracy and repeatability be recorded? |
| Off-site CNC insert production | Controlled preparation of replacement material | Are references and assembly allowances reliable? |
| Guided on-site machining | Local control without moving the element | Are support, dust control and stop boundaries agreed? |